11-03-2008 03:24 AM - edited 03-04-2019 12:10 AM
Hi,
What does the following tag do:
ip route 0.0.0.0 0.0.0.0 10.142.104.244 tag 41
1. When and why we need a tag?
2. when we need to set tag under route-map statement?
I will appreciate if anyone can send me a document link about tagging.
Thanks in advance,
Solved! Go to Solution.
11-03-2008 06:46 AM
Hello Iqbal,
for route tags with OSPF
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/routmap.html
EIGRP:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t8/feature/guide/gteigrpr.html#wp1054363
Hope to help
Giuseppe
11-03-2008 04:44 AM
HI Chowdhury, [Pls Rate if HELPS]
To redistribute routes in the routing table that match the specified tags, use the match tag command in route-map configuration mode. To remove the tag entry, use the no form of this command.
Examples
The following example redistributes routes stored in the routing table with tag 5:
route-map name
match tag 5
Hope I am Informative.
Pls RATE if HELPS
Best Regards,
Guru Prasad R
11-03-2008 06:46 AM
Hello Iqbal,
for route tags with OSPF
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/routmap.html
EIGRP:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t8/feature/guide/gteigrpr.html#wp1054363
Hope to help
Giuseppe
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide