11-03-2008 03:24 AM - edited 03-04-2019 12:10 AM
Hi,
What does the following tag do:
ip route 0.0.0.0 0.0.0.0 10.142.104.244 tag 41
1. When and why we need a tag?
2. when we need to set tag under route-map statement?
I will appreciate if anyone can send me a document link about tagging.
Thanks in advance,
Solved! Go to Solution.
11-03-2008 06:46 AM
Hello Iqbal,
for route tags with OSPF
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/routmap.html
EIGRP:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t8/feature/guide/gteigrpr.html#wp1054363
Hope to help
Giuseppe
11-03-2008 04:44 AM
HI Chowdhury, [Pls Rate if HELPS]
To redistribute routes in the routing table that match the specified tags, use the match tag command in route-map configuration mode. To remove the tag entry, use the no form of this command.
Examples
The following example redistributes routes stored in the routing table with tag 5:
route-map name
match tag 5
Hope I am Informative.
Pls RATE if HELPS
Best Regards,
Guru Prasad R
11-03-2008 06:46 AM
Hello Iqbal,
for route tags with OSPF
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/routmap.html
EIGRP:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t8/feature/guide/gteigrpr.html#wp1054363
Hope to help
Giuseppe
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: