How to configure L3 Port Channel between two 6509

Answered Question
Nov 3rd, 2008
User Badges:

I'm running two L3 connection between my core switches. Would this be the right config:

interface Port-channel200

desc Port channel CoreA to CoreB

ip address 10.10.200.1 255.255.255.252


int GigabitEthernet1/1

no ip address

channel-group 200 mode desirable


int GigabitEthernet1/2

no ip address

channel-group 200 mode desirable


Am I missing anything?


Thank you!



Correct Answer by Jon Marshall about 8 years 6 months ago

Under each physical interface add


int gi1/1

no switchport


int gi1/2

no switchport


Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jon Marshall Mon, 11/03/2008 - 10:52
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Under each physical interface add


int gi1/1

no switchport


int gi1/2

no switchport


Jon

Actions

This Discussion