11-03-2008 10:50 AM - edited 03-06-2019 02:16 AM
I'm running two L3 connection between my core switches. Would this be the right config:
interface Port-channel200
desc Port channel CoreA to CoreB
ip address 10.10.200.1 255.255.255.252
int GigabitEthernet1/1
no ip address
channel-group 200 mode desirable
int GigabitEthernet1/2
no ip address
channel-group 200 mode desirable
Am I missing anything?
Thank you!
Solved! Go to Solution.
11-03-2008 10:52 AM
Under each physical interface add
int gi1/1
no switchport
int gi1/2
no switchport
Jon
11-03-2008 10:52 AM
Under each physical interface add
int gi1/1
no switchport
int gi1/2
no switchport
Jon
11-04-2008 10:24 AM
Thank you for your help!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: