11-04-2008 01:17 AM - edited 03-06-2019 02:17 AM
Hi there
I have a stack wise of n.4 3750. When I try to detach a switch from the stack I still see the whole stack configuration :
From gig1/0/1 to gi4/0/48 and its normal ... I would like to clean the config and to have only the gig1 slot I write erase the config..
Nothing changes !
Do I have to delete one of these stroed file to FACTORY DEFAULT my 3750 ?
roentgen-4pa-3750-1#dir
Directory of flash:/
2 -rwx 3928 Oct 6 2008 15:19:52 +02:00 vlan.dat
4 -rwx 3096 Oct 27 2008 16:04:56 +01:00 multiple-fs
5 -rwx 1940 Oct 27 2008 16:04:56 +01:00 private-config.text
6 -rwx 27408 Oct 27 2008 16:04:56 +01:00 config.text
459 drwx 192 Mar 1 1993 01:23:11 +01:00 c3750-ipbasek9-mz.122-40.S
E
Solved! Go to Solution.
11-04-2008 02:23 AM
Only the command. Once this is done rest of the switch config will get erase. Do a write mem after that.
HTH,
-amit singh
11-04-2008 01:39 AM
Hi,
When you remove the switch out of the stack it retains all the switch stack config, which is a normal behaviour. To completely remove the configuration, use the no switch stack-member-number provision global configuration command.
HTH,Please rate if it does.
-amit singh
11-04-2008 01:58 AM
Many thanks for the suggestion .
Its the only command ? Or I have to make an erase or a reload of the switch after doing
no switch stack-member-number provision
thanks
11-04-2008 02:23 AM
Only the command. Once this is done rest of the switch config will get erase. Do a write mem after that.
HTH,
-amit singh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide