Solved: Cannot delete STACK WISE 3750 config

abelleli71 · ‎11-04-2008

Hi there

I have a stack wise of n.4 3750. When I try to detach a switch from the stack I still see the whole stack configuration :

From gig1/0/1 to gi4/0/48 and its normal ... I would like to clean the config and to have only the gig1 slot I write erase the config..

Nothing changes !

Do I have to delete one of these stroed file to FACTORY DEFAULT my 3750 ?

roentgen-4pa-3750-1#dir

Directory of flash:/

2 -rwx 3928 Oct 6 2008 15:19:52 +02:00 vlan.dat

4 -rwx 3096 Oct 27 2008 16:04:56 +01:00 multiple-fs

5 -rwx 1940 Oct 27 2008 16:04:56 +01:00 private-config.text

6 -rwx 27408 Oct 27 2008 16:04:56 +01:00 config.text

459 drwx 192 Mar 1 1993 01:23:11 +01:00 c3750-ipbasek9-mz.122-40.S

E

Amit Singh · ‎11-04-2008

Only the command. Once this is done rest of the switch config will get erase. Do a write mem after that.

HTH,

-amit singh

View solution in original post

Amit Singh · ‎11-04-2008

Hi,

When you remove the switch out of the stack it retains all the switch stack config, which is a normal behaviour. To completely remove the configuration, use the no switch stack-member-number provision global configuration command.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_44_se/configuration/guide/swstack.html#wp1182077

HTH,Please rate if it does.

-amit singh

abelleli71 · ‎11-04-2008

Many thanks for the suggestion .

Its the only command ? Or I have to make an erase or a reload of the switch after doing

no switch stack-member-number provision

thanks

Amit Singh · ‎11-04-2008

Only the command. Once this is done rest of the switch config will get erase. Do a write mem after that.

HTH,

-amit singh