Switch 2950 boot problem

Unanswered Question
Nov 4th, 2008
User Badges:

Hi

The switch boots up immediately into Rommon mode. The flash system is empty. Is there a way to copy a new ios into the flash file system?

Thanks for any pointer

Regards

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jon Marshall Tue, 11/04/2008 - 03:47
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

You will need to use xmodem to transfer a new IOS onto the 2950. Attached is a link to recovering software on 2950 switches -


http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_20_ea2/configuration/guide/swtrbl.html#wp1021167


Make sure you set BAUD rate to 115200 as that will speed things up a bit :-)


Jon

Actions

This Discussion