11-04-2008 03:31 AM - edited 03-06-2019 02:18 AM
Hi
The switch boots up immediately into Rommon mode. The flash system is empty. Is there a way to copy a new ios into the flash file system?
Thanks for any pointer
Regards
11-04-2008 03:47 AM
You will need to use xmodem to transfer a new IOS onto the 2950. Attached is a link to recovering software on 2950 switches -
http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_20_ea2/configuration/guide/swtrbl.html#wp1021167
Make sure you set BAUD rate to 115200 as that will speed things up a bit :-)
Jon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community