Unanswered Question
Nov 4th, 2008
User Badges:

Is there a possibility to read the firewall configuration over snmp and write it down to a tftp server? The customer has two firewallsystems and want to save the configurations daily to a tftp server. He has a linux server to provide the snmp and tftp services. The CSM is too big for this really little problem. For routers and switches exist a solution, named pancho.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Joe Clarke Tue, 11/04/2008 - 06:23
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

The PIX/ASA do not support SNMP read-write operations, so getting the config via SNMP/TFTP like with IOS or CatOS will not be possible. CiscoWorks RME uses telnet or SSH to capture the config from these devices.


This Discussion