Solved: BRI MGCP issue with Callmanager 6

norm.trees · ‎11-04-2008

Hi,

have tried to set up an MGCP gateway with 2 x VIC2-2BRI-NT/TE cards.

all is ok, except when I try to configure the individual ports.

I am unable to select a protocol from the BRI Protocl drop down box within the Interface Information section. All that is available is -- Not Selected --

I am looking to select BRI-NET3 but it is not there!!!

any ideas?

N.

Jaime Valencia · ‎11-04-2008

.9901 means next release, i just checked the bug and it has been updated

Fixed-In

6.1(2.9901.59)

7.0(0.39700.127)

7.0(0.66666.1)

7.0(0.66666.2)

7.0(1.11000.2)

7.1(0.98999.7)

6.1(2.1122.1)

last ES available at CCO is

UCSInstall_UCOS_ES_6.1.2.1112-2.sgn.iso

so you'll have to log a TAC case to get the ES you need.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

View solution in original post

Jaime Valencia · ‎11-04-2008

maybe this bug??

CSCsq38457

Unable to select the BRI protocol for the BRI interface in CUCM

Symptom:

Unable to select the BRI protocol for the BRI interface in CUCM

Conditions:

Issue is observed for c2801 configured for MGCP control.

There is no option to add the BRI protocol for the BRI interface in CUCM.

This is observed for CCM 6.1.1 and 6.1.2. Issue was not observed for CCM version 4.2 and 5.1.3

Workaround:

None

Fixed-In

6.1(2.9901.59)

7.0(0.39700.127)

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

norm.trees · ‎11-04-2008

My version is 6.1.2.1000-13 and it is indeed a 2801 ISR.

To upgrade to 6.1(2.9901.59), is this a reinstall?

Regards

N.

Jaime Valencia · ‎11-04-2008

.9901 means next release, i just checked the bug and it has been updated

Fixed-In

6.1(2.9901.59)

7.0(0.39700.127)

7.0(0.66666.1)

7.0(0.66666.2)

7.0(1.11000.2)

7.1(0.98999.7)

6.1(2.1122.1)

last ES available at CCO is

UCSInstall_UCOS_ES_6.1.2.1112-2.sgn.iso

so you'll have to log a TAC case to get the ES you need.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

Ashish Patel · ‎02-06-2009

Hi

The Prerequisites here might clarify some things as well

http://www.cisco.com/en/US/docs/ios/voice/cminterop/configuration/guide/

vc_mgcp_bri_sig_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1

057714