11-05-2008 08:29 AM - edited 07-03-2021 04:43 PM
I am trying to get our Cisco 1130 AP's to use Radius MAC Authentication using a freeradius server. We have been successful with other AP's (Proxim, Netgear) but haven't been able to get the Cisco 1130 to work.
I have attached 2 files. One is the running config, and the other is a debug of radius.
This is what the freeradius log says.
Thu Nov 6 02:48:46 2008 : Auth: Login OK: [004096a3e012/004096a3e012] (from client 10.80.0.17 port 291 cli 00-40-96-A3-E0-12)
I would appreciate any help that anyone is willing to give.
11-11-2008 11:32 AM
Use the wpa-psk SSID interface configuration command to configure a pre-shared key for use in WPA authenticated key management. To support WPA on a wireless LAN where 802.1x-based authentication is not available, you must configure a pre-shared key for the SSID.
wpa-psk { hex | ascii } [ 0 | 7 ] encryption-key
but make sure that This command is not supported on bridges.
11-13-2008 06:19 AM
I get this error.
Error: WPA-PSK not supported with MAC address authentication configured
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: