Integrating LMS Server to an ACS

Unanswered Question
Nov 5th, 2008

I want to clarify some things in respect to the above subject matter. I want to know the following:


ACS username and password. Will I use the system identity name and password which I created on the CWLMS here or will I use the ACS admin username and password.


Someone should please clarify this for me.Thanks.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mchin345 Tue, 11/11/2008 - 07:07

You should use ACS Admin user name & password for login Cisco Secure ACS. ACS Admin Name: Enter the administrator user name that you would use to log in to Cisco Secure ACS. This is the same user you created under Administration Control in ACS.

ACS Admin Password: Enter the administrator password that you would use to log in to Cisco Secure ACS

For further information click this link.

http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/prod_white_paper0900aecd80613f62.html#wp9000205


troymaki Wed, 11/26/2008 - 14:46

Maybe this will help. I had the same question and found this today.

Add the System Identity user


The System Identity user makes possible the trusted communication between LMS and ACS servers. It must be properly set up on both the LMS and ACS servers.

First, in LMS Common Services, add the System Identity user under Local User Setup and assign it all the default roles (Figure 15).


http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/prod_white_paper0900aecd80613f62.html#wp9000155



Actions

This Discussion