Starting Call Manager with bad DIMM

Unanswered Question
Nov 5th, 2008
User Badges:

Had a failure of one 1GB DIMM on an MSC7823H3. Cisco is RMA-ing a new one. Any ideas on how to boot without full memory. The machine gets almost though the boot and then says there is an unsupported hardware error and Call Manager Bus. Edition cannot load. The only option at that point is a shut down.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion