Meeting Place Express Server Local Access?

Unanswered Question
Nov 5th, 2008
User Badges:

I would like to know how to found the availalbe commnad in the local console of Meeting Place Express Server since it were linux-based?


Because i need to check the network configuration like ip address,subnet mask and default gateway for that server

but some general linux command like "ifconfig" did not work?


Thanks for any suggestion.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jonathan Schulenberg Fri, 11/07/2008 - 04:03
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

The command you are looking for is "net".


Example:

login as: mpxadmin

[email protected]'s password:

Last login: ___ from YYY

[[email protected] mpxadmin]$ su - root

Password:

[[email protected] root]# net

This is the MeetingPlace Express network configuration utility.

Up to the point where you save changes, it is safe to hit ^C to get

out at any time, in which case nothing will have changed.


1) List current configuration

2) Configure Ethernet port 1

3) Configure Ethernet port 2

4) Configure service bindings

5) Set host names

6) Set domain name

7) Configure DNS service

8) Configure NTP service

9) Configure routing

10) Done

Select:


Actions

This Discussion