11-05-2008 10:15 PM - edited 03-11-2019 07:09 AM
I have pix 525 with
Cisco PIX Firewall Version 6.3(5)
Cisco PIX Device Manager Version 3.0(4)
1.what is the requirement for accessing the PIX via PDM.
2.For backup image on TFTP server i used the command copy flash tftp but failed to backup image
can anyone tell me the steps for backup PIX image on TFTP Server.
3.After backup current PIX and PDM image i want to upgrade to PIX 7 and accessing via ASDM.
Can anyone tell me all steps for accomplishing the above tasks.
Thanks in advance.
11-06-2008 12:24 AM
If you want to do it without PDM, then try this
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00804708d8.shtml
11-06-2008 10:19 PM
Thanks for reply.The document will be helpful for upgrading the PIX IOS.
NOw I tried to copy the current image from Pix to TFTP server but failed to do so.
can anyone tell me the exact command with example for copy PIX 6.3 IOS from PIX to TFTP server.
Thanks in advance.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide