problem with the show runn

serenity001 · ‎11-05-2008

hi .. i have a 3560 switch and all port are configured as access mode except the gig port is configured as trunk

now when i do show runn i see new commands on the fastethernet ports

like

switch port mode trunk

my ios image is

c3560-ipbasek9-mz.122-46.SE.bin

any 1 have a solution for this ??

regards

shevchiksv · ‎11-06-2008

Do you define explicitly switcport mode access?

lffrwatson · ‎11-06-2008

put the ports in Access mode and access vlans.

switchport mode access

switchport access vlan xxx

John Blakley · ‎11-06-2008

Does your gig port lead to a router or another switch? Don't randomly put your ports in access mode if you don't know what they're connecting to.

--John

HTH, John *** Please rate all useful posts ***

serenity001 · ‎11-08-2008

thx ppl

i have attached two files ,

first i have erased all the config then do multiple show runn please see how new thing is coming under random ports (the file is befor config)

thin i configuerd the switch with some vlans and connect it to another switch on port f0/24

i can ping and telnet, i meant the switch is working .. but didn't get why this commands are coming