Site to site VPN w/ Remote access config

Unanswered Question
Nov 6th, 2008
User Badges:

I have a main site in USA and a remote site in the UK (w/ 3 users). I have a 5510 in the USA and will be installing a 5505 in the UK. I want to create a site-to-site VPN between the sites and direct all internet traffic from the UK through the 5510 in the USA for filtering and logging. Also I need the UK computers to access my exchange server in the USA.

Also, the manager in the UK travels so I want him to have SSL-VPN access to the UK office while he is on the road.

For the site-to-site, do I just configure a simple IPsec VPN on each ASA? What command do I need to direct the internet traffic to the 5510?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
smalkeric Wed, 11/12/2008 - 09:39
User Badges:
  • Silver, 250 points or more

You can configure Site-to site VPN using ASDM. Site-to-site VPN features provided by the adaptive security appliance enable businesses to extend their networks across low-cost public Internet connections to business partners and remote offices worldwide while maintaining their network security. A VPN connection enables you to send data from one location to another over a secure connection, or tunnel, first by authenticating both ends of the connection, and then by automatically encrypting all data sent between the two sites.

johnnylingo Wed, 11/12/2008 - 11:58
User Badges:
  • Bronze, 100 points or more

I believe you'll have to specify as the network for the main site.

Also the 5505 in the remote UK office will need a static route for the public IP of your main office. Something like "route outside


This Discussion