BPX - 8600

Unanswered Question
Nov 6th, 2008


Trunk OF card BXM-622 OC-12 dont pass through of data.

Detail: Stats trunk is Active

BPCTIA01 VT Service BPX 8620 9.2.43 Nov. 6 2008 17:56 G-03

TRK Type Current Line Alarm Status Other End

1.1 OC12 Clear - OK BPCTIB01/1.1

9.1 OC12 Clear - OK BPCTIB01/9.1

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
aghaznavi Wed, 11/12/2008 - 14:18

If it seems to the problem on trunk. Try to reset this trunk at both ends. Else I think the issue here is the longer route seems to be the best route from the BPX perspective coz when a preferred route is configured on the shorter route, it works

pretty well but when a connection is created normally, the network chooses the longer route to build it. Maybe the Routing algorithm is mixed up here....

petermarciano Wed, 11/12/2008 - 15:05


Interconnected via card OC-12 in both.

I have some interfaces OC-3 interconnected in such a way, however OC12- not.

you know some difference between configuration of CARDs OC12 for OC-3 ?

this can be the problem !!

my team it knows very of Cards OC3, however OC12- not.

thanks !!


This Discussion