CUCM 6.0.1 - Media Routing through the server

Unanswered Question
Nov 6th, 2008
User Badges:

Hi,


I have CUCM 6.0.1.3000-7 and registered two third party SIP device to the Server.


While I am making the call between these two devices, the media (RTP) is flowing end to end, not through CUCM.


I want to route all the media(RTP) through CUCM. How is it possible?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (2 ratings)
Loading.
Keith Fulcher Fri, 11/07/2008 - 01:34
User Badges:

Media is always end to end.......even with the phones. Only the signaling is routed to the CUCM. I doubt there is a way to do this.

Jaime Valencia Fri, 11/07/2008 - 10:34
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

CUCM is only a call agent, signaling is stimulus-response. RTP is always between endpoints, that's the whole point of call preservation. if CCM fails, calls are preserved because RTP is between endpoints.


HTH


java


if this helps, please rate

nissarbm_ece Sat, 11/08/2008 - 02:01
User Badges:

Thanks for your response.


With the SCCP supported devices, does the media is routed through the CUCM ?

Jaime Valencia Sat, 11/08/2008 - 08:17
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

no, CUCM does not make media flow-thru


in any protocol


media is between devices. only reason a device sends media to CCM is to use the SW CFB.


if you need that start looking at CUBE


HTH


java


if this helps, please rate

nissarbm_ece Sun, 11/09/2008 - 20:36
User Badges:

What is thins SW CFB and CUBE?


You have any reference link to these topics?

Jaime Valencia Mon, 11/10/2008 - 07:08
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

Software Conference Bridge

Cisco Unified Border Element


Documentation can be easily found in CCO


HTH


java


if this helps, please rate

Actions

This Discussion