4 Digit to 10 Digit Dialing - W/O Using Speed Dials

Answered Question
Nov 7th, 2008
User Badges:

Hi Guys,


I'm trying to get my CME 7.0 system users to dial a non DN 4 digit extension and have that translated to a 7-10 digit extension. Like a customer wants to dial one of their employees that works via cell phone. They want to dial a 4 digit number and have that transfered to their 7-10 digit outside extension. This could be done via a translation pattern in CUCM but not sure how to do it in CUCME. Would a dial-peer work or number translations? If so how would they be configured?


Thank You!

Correct Answer by Brandon Buffin about 8 years 4 months ago

One way to do this is with the "num-exp" command. So if you want to dial 1234 and translate it to 91234567, you could configure "num-exp 1234 91234567". It could also be done with a voice translation rule.


Hope this helps. If so, please rate the post.


Brandon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Brandon Buffin Fri, 11/07/2008 - 08:30
User Badges:
  • Purple, 4500 points or more

One way to do this is with the "num-exp" command. So if you want to dial 1234 and translate it to 91234567, you could configure "num-exp 1234 91234567". It could also be done with a voice translation rule.


Hope this helps. If so, please rate the post.


Brandon

Actions

This Discussion