11-07-2008 09:02 AM - edited 03-11-2019 07:10 AM
Is there a way to secure the access for ASDM after a user logs in?
For example:
ssh to public address prompts username and then a password for the enable
http doesn't. You can log into the ASDM with the local username and apply any change you want without using any other authentication. I'm assuming that the ASDM uses elevated authentication? Is there a way around this?
Thanks,
John
Solved! Go to Solution.
11-07-2008 12:46 PM
John,
You need to use command authorization using tacacs or you can also setup local user with different access rights.
With TACACS
http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/mgaccess.html#wp1042034
Regards,
~JG
Do rate helpful posts
11-07-2008 12:46 PM
John,
You need to use command authorization using tacacs or you can also setup local user with different access rights.
With TACACS
http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/mgaccess.html#wp1042034
Regards,
~JG
Do rate helpful posts
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: