version 6.x

cbestbone · ‎11-07-2008

I am getting the error not enough physical disks [0 out of 2 present]

I found this error pertaining to 5.x needing the array controller to be installed in slot 1. Well it is, and I confirm it with the bios report upon boot. I have done many things, and each time it yields the same error.

This is a lab environment, so I am able to do pretty much anything to the system with no worries about taking the system down. Please advise.

Jaime Valencia · ‎11-07-2008

are you receiving errors when booting up?

maybe something like this??

Waiting for controller to startâ€¦..controller not started

Controller #00: IBM ServerRaid 8k-l at PCI Slot :00, Bus:04, Dev:00, Func:00

if so i'd recommend you to open a TAC case, it's probable they need to replace your controller

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

cbestbone · ‎11-07-2008

no errors at all until the very end. As I wrote before:

Error: not enough physical disks [0 out of 2 present]

The only error.