Extendending VRF to the FWSM

Unanswered Question
Nov 8th, 2008

Hi,

I am trying to setup single context FWSM on 6500. On MSFC I have multiple vlans configured. Also I have VRF configured for Guest and Developers access. I want that all the traffic should go through the FWSM but can not figure out how to do it. I will appreciate any help.

Here is the config for VRF

interface Tunnel409

ip vrf forwarding Guest

ip address 10.1.251.34 255.255.255.252

tunnel source Loopback409

tunnel destination 10.1.251.209

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
a.alekseev Fri, 11/14/2008 - 03:41

===tunnel======mscf(vrf Guest)=====vlan400=====FWSM

on MSFC

int vlan 400

ip vrf forwarding Guest

ip add 10.0.0.1 255.255.255.248

on FWSM

int vlan400

ip add 10.0.0.2 255.255.255.248

something like this...

Actions

This Discussion