Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
409
Views
0
Helpful
3
Replies

Auto Attendant Guide for Cisco Unity?

Go to solution
blackswans
Level 1
Level 1

‎11-08-2008 05:49 AM - edited ‎03-18-2019 09:57 PM

I couldnt find any AA configuration guide for the Unity. Where can I find this pdf? Also can I transfer the scripts that written for CUE to unity?

thx

Labels:
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
Jaime Valencia
Cisco Employee
Cisco Employee

‎11-08-2008 08:26 AM

if you mean you looked CCO we don't have any. i think there has been some around in NetPro but couldn't find it.

basic things you need to know is you use call handlers, you record the greeting and configure the options under the caller input.

from caller input you can go to another call handler as a submenu or transfer to a particular DN.

it's pretty easy and you can get the hang of it if you take 30 minutes to fool around with that.

on CCM usually we create a CTI RP with CFA to VM and in unity a call routing rule for FWd calls to reach AA main menu.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

View solution in original post

0 Helpful
3 Replies 3

Go to solution
lindborg
Cisco Employee
Cisco Employee

‎11-08-2008 08:23 AM

There is no proper audio text guide per se - the Unity admin guides talk about the pieces you use to build them (call handlers, interview handlers, routing rules, name lookup handlers) but not really the “big picture” approach.

You might find a document out here helpful, though

http://www.ciscounitytools.com/Documents.htm

There's a link there to the “Audiotext Applications in Unity” doc that was a rough draft for the Unity Administration and Configuration Guide Cisco Press book some moons ago. It was written against 4.0(3) but for Unity most of it is still relevant. I need to write a revamped version for Connection since much has changed there (proper holiday greetings, tenant services support, dial partitions, multiple language greeting sets, route from next options etc…). Just not enough hours in the day I'm afraid…

And no - there is no CUE to Unity migration capability.

0 Helpful

Go to solution
Jaime Valencia
Cisco Employee
Cisco Employee

‎11-08-2008 08:26 AM

if you mean you looked CCO we don't have any. i think there has been some around in NetPro but couldn't find it.

basic things you need to know is you use call handlers, you record the greeting and configure the options under the caller input.

from caller input you can go to another call handler as a submenu or transfer to a particular DN.

it's pretty easy and you can get the hang of it if you take 30 minutes to fool around with that.

on CCM usually we create a CTI RP with CFA to VM and in unity a call routing rule for FWd calls to reach AA main menu.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate
0 Helpful

Go to solution
bigcappa1
Level 4
Level 4

‎11-10-2008 09:01 AM

I have put together a presentation I can post on Unity conection and CUCM6 IVR if you want, to give you an idea of the principle required

Let me know

Paul

0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents