11-08-2008 01:55 PM - edited 03-04-2019 12:14 AM
Hi all,
Does anwyone know which IOS I need to install on my Cisco 1711 router so that when I type in show ver it says Cisco 1711 insteatd of Cisco IPM (MPC86). I need to ge the proper IOS because SDM is not working because of this Cisco IPM version issue
11-10-2008 05:03 PM
Can you post the output for us to see?
__
Edison.
11-11-2008 03:15 AM
Cisco1711#show ver
Cisco IOS Software, C1700 Software (C1700-ADVSECURITYK9-M), Version 12.4(15)T7, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Wed 13-Aug-08 14:11 by prod_rel_team
ROM: System Bootstrap, Version 12.2(7r)XM4, RELEASE SOFTWARE (fc1)
Cisco1711 uptime is 1 day, 20 hours, 30 minutes
System returned to ROM by reload
System image file is "flash:c1700-advsecurityk9-mz.124-15.T7.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco IPM (MPC862P) processor (revision 0x101) with 115885K/15187K bytes of memory.
Processor board ID FOC08078M0Q (1743016855), with hardware revision 0000
MPC862P processor: part number 7, mask 0
1 Ethernet interface
5 FastEthernet interfaces
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
11-11-2008 06:12 AM
Niall,
After some research, it seems the problem is seen when the router has a faulty hardware component. Can you provide the show diag output?
Thanks.
__
Edison.
11-11-2008 06:15 AM
BTW, if you aren't using a feature that only is available in the T train, I recommend staying away from it.
You should try the mainline train, IOS release c1700-advsecurityk9-mz.124-21a.bin
HTH,
__
Edison.
11-12-2008 05:41 PM
Cisco1711#show diag
Slot 0:
Unknown Port adapter, 5 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 1.1
PCB Serial Number : FOC08078M0Q
Part Number : 73-8969-01
Board Revision : B0
Fab Version : 04
Product (FRU) Number : Unknown
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 04 48 41 01 01 C1 8B 46 4F 43 30 38 30
0x10: 37 38 4D 30 51 82 49 23 09 01 42 42 30 02 04 FF
0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
WIC/VIC Slot 0:
4 Port FE Switch
Daughter card-Version 4 TLV Cookie Format
Hardware Revision : 1.0
Part Number : 73-8958-01
Board Revision : C0
Deviation Number : 0-0
Fab Version : 01
PCB Serial Number : FOC082520KQ
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Top Assy. Part Number : 800-24817-01
Connector Type : 01
Base MAC Address : 0012.0087.a7ac
MAC Address block size : 20
Product (FRU) Number : WIC-4ESW
CLEI Code : IPMED00BRA
11-12-2008 06:34 PM
Slot 0:
Unknown Port adapter, 5 ports
This can be the root of the problem. What's on that slot?
Can you try installing the mainline IOS version I recommended?
__
Edison.
11-13-2008 05:38 AM
I have installed the recommended version here is the output:
Cisco_1711#show ver
Cisco IOS Software, C1700 Software (C1700-ADVSECURITYK9-M), Version 12.4(21a), RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Mon 29-Sep-08 13:38 by prod_rel_team
ROM: System Bootstrap, Version 12.2(7r)XM4, RELEASE SOFTWARE (fc1)
Cisco_1711 uptime is 9 hours, 54 minutes
System returned to ROM by reload
System image file is "flash:c1700-advsecurityk9-mz.124-21a.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco IPM (MPC862P) processor (revision 0x101) with 114688K/16384K bytes of memory.
Processor board ID FOC08078M0Q (1743016855), with hardware revision 0000
MPC862P processor: part number 7, mask 0
1 Ethernet interface
5 FastEthernet interfaces
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Cisco_1711#show diag
Slot 0:
Unknown Port adapter, 5 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 1.1
PCB Serial Number : FOC08078M0Q
Part Number : 73-8969-01
Board Revision : B0
Fab Version : 04
Product (FRU) Number : Unknown
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 04 48 41 01 01 C1 8B 46 4F 43 30 38 30
0x10: 37 38 4D 30 51 82 49 23 09 01 42 42 30 02 04 FF
0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
WIC/VIC Slot 0:
4 Port FE Switch
Daughter card-Version 4 TLV Cookie Format
Hardware Revision : 1.0
Part Number : 73-8958-01
Board Revision : C0
Deviation Number : 0-0
Fab Version : 01
PCB Serial Number : FOC082520KQ
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Top Assy. Part Number : 800-24817-01
Connector Type : 01
Base MAC Address : 0012.0087.a7ac
MAC Address block size : 20
Product (FRU) Number : WIC-4ESW
CLEI Code : IPMED00BRA
11-13-2008 06:43 AM
My research indicates this is causing the problem:
Cisco_1711#show diag
Slot 0:
Unknown Port adapter, 5 ports
Since the device is a fixed model, not modular, you would need to replace the unit. It's an EOL product and I assume it's not under Cisco warranty. If the name issue is that important to you, I recommend upgrading the hardware to a 1800 model.
HTH,
__
Edison.
Please rate helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide