11-08-2008 07:25 PM - edited 07-03-2021 04:45 PM
Hi fella,
I have a problem with this Cisco 1100 AP, LED Light said: Red-Green-Red
here a link @ http://www.cisco.com/en/US/docs/wireless/access_point/1100/installation/guide/110h_c6.html
I tried to obtaining IP Address from AP, no response IP Address from Windows Vista, tried 10.0.0.1 in from website address. Cannot Response.
How do I solution? I'm newbie.
11-09-2008 12:41 PM
Try reverting the AP to IOS, using the c1100-k9w7-tar.default file name method as mentioned in the link.
11-09-2008 07:29 PM
How do I put???? I don't know how to put this in AP??? Help me...
11-10-2008 01:48 AM
Read the section ;
"Using the MODE Button to Return the Access Point to Autonomous Mode " in the link in your original post.
To summarise;
Step one: Change your workstation address to 10.0.0.29/24
Step two: Rename IOS image (tar file) to c1100-k9w7-tar.default
Step three: setup tftp server
Step four: Connect AP and workstation to switch or interconnect with a crossover cable.
Step five: Turn on AP while holding down mode button for +- 20 seconds (Radio led turns red) then release mode button
Step 6: Wait until the access point reboots, as indicated by all led's turning green followed by the Status led blinking green
11-12-2008 07:12 PM
Won't work for me using AP to PC. Can you fix my AP for me?
11-13-2008 03:06 AM
Where does the recovery fail?
11-13-2008 02:32 PM
Try a crossover cable if you cannot connect to the AP with your PC. It's an 1100, right? 1100s do not support auto-MDIX.
11-14-2008 08:54 PM
Do you mean CAT5 cable? Yes. I tried it but it didn't work. I tried Ping 10.0.0.1 then no response from AP. I need my ap back to Cisco System for fix it.
12-21-2008 04:42 PM
i got Crossover cable. what i do?
11-13-2008 05:57 PM
I think it is IOS Software Someone put wrong IOS Image in it
12-21-2008 04:43 PM
Please show me how to on video.
11-30-2008 07:51 PM
I'd RECOMMENDED IOS Software NEED to add for putting wrong IOS Software then it will tell you for IOS failure, reboot for get old IOS Software back without getting problem.
11-30-2008 07:54 PM
And I tried everything. I dont have any tool (Cisco controller, many thing). I like Cisco System because it best network technology.
BUT it LOT money than all.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: