Dial-Peers to support 10 and 7 digit Local Dialing

Unanswered Question
Nov 9th, 2008
User Badges:

I just implemented SRST and have one remaining sticking point.


Using these peers:

dial-peer voice 12 pots

description Local Dialing

destination-pattern 9[2-9]......

port 0/0/0:23

forward-digits 7

!

dial-peer voice 13 pots

trunkgroup SRST-PSTN

description Local 10 Digit Dialing

destination-pattern 9[2-9]..[2-9]......

port 0/0/0:23

forward-digits 10


The router will IMMEDIATELY match dial peer 12 and I am unable to use 10 digit dialing.


How can I concurrently support both 10 and 7 digit local dialing?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Kris Thompson Sun, 11/09/2008 - 11:23
User Badges:

Sometimes it only takes asking the question to get the answer. I added a T on the end of the 7 digit destination pattern to force the pattern to be longer than the 10 digit local dial. It now works (with an interdigit delay which is acceptable).


dial-peer voice 12 pots

destination-pattern 9[2-9]......T


Marwan ALshawi Sun, 11/30/2008 - 02:45
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, December 2015

by the way have u noticed that it will will take a while till dial out with the T !!!


this is because interdigit timeout

u can dial # after the number

or u can decrease the inter digit time out under the fallback mode


hope this helpful

Actions

This Discussion