PIX 515ER upgrade from 6.3(4) to 6.3(5) and PDM

Answered Question
vincent-n Sun, 11/09/2008 - 21:04
User Badges:

Just another question then regarding the upgrading procedures

1. Disconnect the primary unit and upgrade using 'copy tftp flash'

2. Upgrade PDM following http://www.cisco.com/en/US/docs/security/pix/pix63/pdm30/installation/guide/pdm30CH3.html

3. Power up the primary unit - my question here is what would happen to the standby unit now that it's running 6.3(4) and the primary unit is 6.3(5)?


This Discussion