didyap Sat, 11/15/2008 - 10:18

Use the guard-interval configuration mode command to configure the The 802.11n guard interval. The guard interval is the period in nanoseconds the radio listens between packets. Two settings are available: short (400ns) and long (800ns).

This example shows how to set a long guard interval on a 2.4-GHz 802.11n radio:

ap#config terminal

ap(config-if)#interface dot11radio0

ap(config-if)#guard-interval long

ap(config-if)#end

ap#copy running-config startup-config

I hope it may help you.



krishanmistry Sat, 11/15/2008 - 13:30

Thanks Didyap


I was aware of the configuration for an IOS AP however I am looking for the configurations on a controller based solution.


Many Thanks

grzegorz.ciolek Sat, 11/15/2008 - 13:59

Hi,

Which value do you need. As far as I remember (video from networkers) default in controller is 400ns.

Cheers

Greg

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode