[ASR1000] PPPoA support?

erik · ‎11-10-2008

Is there any PPPoA support in the ASR100X series at the moment?

If i use the feature navigator it isn't listed but it's mentioned at

http://www.builtforbroadband.net/en/US/docs/routers/asr1000/install/guide/chassis/asr1_ov1.html

Regards,

Erik

Giuseppe Larosa · ‎11-10-2008

Hello Erik,

it should be supported there is a whole configuration reference for broadband aggregation:

http://www.cisco.com/en/US/docs/ios/bbdsl/command/reference/bba_book.html

So I think it is supported, Feature Navigator may need to be upgraded also because ASR use a specific modular IOS so this can be the reason

Hope to help

Giuseppe

erik · ‎11-10-2008

IOS XE is supported in the Feature Navigator, the document you posted is a general DSL configuration guide for IOS

Giuseppe Larosa · ‎11-10-2008

Hello Erik,

I found it under ASR 1000 command references I had noticed that some links are actually standard IOS links.

Best Regards

Giuseppe

erik · ‎11-17-2008

Ok, just got word from our Cisco account manager, PPPoA is NOT supported at this moment, it is on the roadmap but it's unknown where is it on the roadmap (as usual ;))

My guess it's on the back of the roadmap at best :/