Cisco and other phones for SIP

Unanswered Question

Ladies and Gentlemen:

I am running Call Manager 4.1(3)sr3a at one of my locations with Unity 5.0(1.0) and Exchange 2003.

This is a SIP newbie question.

What Cisco and other branded phones work well with SIP? I am talking about “hard phones” at this point.

I am getting some conflicting information.

Thanks, Tom

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Jaime Valencia Mon, 11/10/2008 - 08:28

are you planning to use them with 4.X?? i mean, you want to register them to CCM???

because SIP support is only 5.X and above, previous versions require a separate SIP server and a SIP trunk to CCM for this to work

HTH

java

if this helps, please rate

Jaime Valencia Mon, 11/10/2008 - 10:29

HTH = Hope This Helps haha

yes, you can have both SIP and SCCP in 5.X and above. Windows based CCM only supports SCCP for phones and as i mentioned, the only way to have this is to have a SIP Proxy, Registrar, Etc separate and create a SIP trunk to communicate between systems.

HTH

java

if this helps, please rate

Actions

This Discussion