(SRST) Number Expansion During System Transfer

Answered Question

This is kinda a follow up question to my last one.


We use a 10 digit dial plan with 5 digit abbreviated dialing within our sites. When is SRST we can transfer a call to the full ten digit extension it works, but our users would like to use the 5 digit extension.


Can I do this with a translation rule or something similar?


Thanks in advance for your help


Here is my current config


call-manager-fallback

max-conferences 10 gain -6

transfer-system full-consult

ip source-address xxx.xxx.xxx.xxx port 2000

max-ephones 40

max-dn 80

transfer-pattern .T

default-destination 8002717060

call-forward busy 8002717060

call-forward noan 8002717060 timeout 30


Correct Answer by Chris Deren about 8 years 5 months ago

You can use a translation profile and apply it to SRST such as:



voice translation-rule 1

rule 1 /^7/ /80027177/

!

!

voice translation-profile 4-DIGIT-SRST

translate called 1


call-manager-fallback

translation-profile incoming 4-DIGIT-SRST


Chris

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (3 ratings)
Loading.
Brandon Buffin Mon, 11/10/2008 - 08:31
User Badges:
  • Purple, 4500 points or more

One way to do this is with the "num-exp" command. So if you want to dial 1234 and translate it to 1234567890, you could configure "num-exp 1234 1234567890".


Hope this helps. If so, please rate the post.


Brandon

Brandon Buffin Mon, 11/10/2008 - 10:56
User Badges:
  • Purple, 4500 points or more

So, you can dial 17... directly and it works, but if you receive a call, press the transfer key and dial 17..., the call fails? Do you get fast busy?


Brandon

Correct Answer
Chris Deren Mon, 11/10/2008 - 09:20
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

You can use a translation profile and apply it to SRST such as:



voice translation-rule 1

rule 1 /^7/ /80027177/

!

!

voice translation-profile 4-DIGIT-SRST

translate called 1


call-manager-fallback

translation-profile incoming 4-DIGIT-SRST


Chris

Chris, I set this up but I wont be able to test till tomorrow because the gateway is in South Africa and they are out for the day.


Here is what I did.


voice translation-rule 2

rule 1 /\(^17...$\)/ /80027\1/

!

voice translation-profile SRST_Exp

translate called 2


call-manager-fallback

translation-profile incoming SRST_Exp

Actions

This Discussion