11-10-2008 10:20 PM
Dear All,
I need to configure and use Cisco 4006 Switch.
i need to make this switch a backup of another switch 4503 for which i want to configure a trunk and same VTP domain.
I could configure VTP but cannot pass configuring the basics;
Console>(enable) set interface sc0 Console>(enable) set ip route default Console>(enable) set system name
please help configuring this switch........
Thank You!
ET
Solved! Go to Solution.
11-10-2008 10:49 PM
You can find numerous examples on the following page:
http://www.cisco.com/en/US/tech/tk389/tk689/tech_configuration_examples_list.html
Regards
Farrukh
11-10-2008 10:49 PM
You can find numerous examples on the following page:
http://www.cisco.com/en/US/tech/tk389/tk689/tech_configuration_examples_list.html
Regards
Farrukh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide