product query

Unanswered Question
Nov 10th, 2008
User Badges:

Hi,


I need to go for a router with the following feature.


. Dual CPU (1+redundant)

. Should have minimum 3 free slots

. Shall support variety of interfaces like Ch-STM1/STM1 and channelized

. STM Interfaces as per ITU-T Standard.

. Router should support interfacing with Ch-STM1, STM1, E3, ChE1, E1,

10/100 Mbps and 1000 Mbps, Gigabit Fiber.

. Ethernet Ports 8 x 10/100 /1000 Mbps or 8 Gig ports

. Channelized STM-1 - 4 Ports, upgradeable to 8 Interfaces

. STM-1 Transceiver Type Single-mode up to 5 KM

. Packet performance of at least 16Mpps or more

. Throughput should be 20 Gbps or more (full-duplex)

. All interfaces shall support wire line rate throughput for L2, L3, VPN

MPLS traffic with QoS and Security features enabled.

. Hardware based Encryptions,IP Sec 3DES/AES internal or external

. Routing Protocols: RIPv1, RIPv2, OSPFv2 and v3, BGP4.

. Protocols: PPP, Multi-link PPP, IPv4, MPLS ,L2 & L3, VRRP,



can i get an approximate idea which router would provide me with the above features


thanks and regards

Rajesh



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
satish_zanjurne Tue, 11/11/2008 - 00:02
User Badges:
  • Silver, 250 points or more


Hi,


Actually your DUAL CPU requirement , throughput of 20Gbps , Ethernet Ports 8 x 10/100 /1000 Mbps or 8 Gig ports makes me to suggest you Cisco 7600 or Catalyst 6500 for you requirement.Other features are also included in this.


HTH...rate if helpful...

Sushil Kumar Katre Tue, 11/11/2008 - 02:03
User Badges:
  • Gold, 750 points or more

I agree with Satish, 6500 or 7600 will fit in this requirement.


-> Sushil

rajesh1331 Tue, 11/11/2008 - 04:16
User Badges:

hi satish , thanks for ur info. I need to confirm if it supports STM/Ch.STM Ports.


rgds

Rajesh

Actions

This Discussion