11-11-2008 07:20 AM - edited 03-06-2019 02:25 AM
Hi all,
If I were to add the following basic route map, what will happen to the rest of the traffic? Will it still pass through the interface untouched and only the matching traffic will be amended, or do require a statement to permit everything else to take the routes as per the route table.
Access-list 100 permit IP host 10.1.10.10 host 10.2.10.14
Access-list 100 permit IP host 10.1.10.11 host 10.2.10.14
Access-list 100 permit IP host 10.1.10.12 host 10.2.10.14
Route-map blah permit 10
Match ip address 100
Set IP next-hop 192.168.101.20
Interface Vlan 10
Ip policy route-map blah
I just want to send the taffic in ACL 100 via a different route.
Thanks
Andy
11-11-2008 07:22 AM
There is an implicit deny in the route-map.
Source/Destination not matching the ACL will be normally forwarded.
HTH,
__
Edison.
11-11-2008 07:24 AM
I thought as much, just couldnt remember!
Cheers
Andy
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide