11-11-2008 08:57 AM
I'm trying to upgrade my field WAE devices, from a software image on my WAE MC (WAE-512). The image is 4.1.1c, this was fine until I upgraded the MC to 4.1.1c, and now every attempt from the GUI or CLI (FTP COPY INSTALL command) fails. Both state the file maybe corrupt or truncated (I have deleted the source image, re-download a new one from Cisco and uploaded to the MC, with no improvement).
11-11-2008 12:33 PM
I had similar problems, when trying to upgrade form 4.013. I upgraded first all WAEs to 4.019, then the CM. I then upgraded the CM to 4.1.1b, and then the WAEs.
You have to upgrade to latest 4.0 before going to 4.1.
11-11-2008 12:49 PM
Thanks for your help, my MC was on 4.1.1b before so I don't think this is the cause of the issue.
Regards,
Richard
11-12-2008 04:27 AM
Okay, try burning the image to a CD and reload and select last option ( I forget eitehr 7 or 8).
Once on CM, then try copy ftp install.
11-11-2008 01:14 PM
I have been upgrading from 4.1.1b to 4.1.1c
had no problem with downloading the software to the boxes
11-12-2008 06:45 AM
I should meantion that in further testing, upgrades to WAEs on the same LAN as the CM worked with no problem from the same software image.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide