'sh cdp ne' - Learning neighbors

Unanswered Question
Nov 11th, 2008
User Badges:

3560-48PS (MechEng_PGrad_(A) switch is connected to the below switches using interfaces 0/46-49. All links are dot1q trunk links.

Basically from the output 'show cdp ne' on this switch, this displays switches which are not neighbors on this switch.

All "learned" links are ISL trunk links on the 6509 switch!

Please advise

3560-48PS (MechEng_PGrad_(A)

G0/46 - xxxx-router WS-C6509

G0/47 - MechEng_PGrad_(B) WS-C3560G

G0/48 - MechEng_PGrad_(C) WS-C3560G

G0/49 - MechEng_PGrad_(B) WS-C3560G

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Edison Ortiz Tue, 11/11/2008 - 09:37
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

The 3560 switch is connected to some kind of Metro-Ethernet service on port 49? If so, the behavior is expected as many switches will participate in the same Vlan hence seeing each other via Layer2.





This Discussion