Creating Guest Access on WLC 2106

Unanswered Question
Nov 11th, 2008

Hi Guys,

What is the best way of creating internet only guest access using WLC 2106?



I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)

Hi Doug, "best way" isn't allways the best for everyone, but here is "my" best way.

I mean guest access should be totally separated from my other networks.

I allways use a guest SSID that terminates on a trunk port on the 2106 and connected to a trunk port on my switch and to the firewall I use a trunkport or an accessport to DMZ port on f/w (if the f/w isn't capable of handling 802.1q).

DHCP source is allways the controller (for guests)

best reg /Goran

dsiziba_1 Mon, 11/17/2008 - 17:22

HI Goran,

Thanks for your reply. Simply put, we want guests to access Internet only via wireless.

Can I use ssid guest with open auth and include auth = key-management in order to terminate the guest ssid on the 2106 where I have their DMZ?





This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode