Partially successfull deploy of ACL on router

Unanswered Question
Nov 12th, 2008

Last week we deployed a new ACL on our 3570 routerswitches. Apparently, about half of the devices ended "partially successfully", probably because of some timeout. When we deploy the ACL manually, it also takes a lot of time to copy it into the config. I already raised the telnet timeout to 120 (secs), but nothing changes. Some ideas how to finetune this problem ?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Joe Clarke Wed, 11/12/2008 - 08:12

There should be more information associated with the partially successful status in the job details window. Most likely, the deployment was successful, but the archive sync afterward did not work. Seeing the job log would be helpful.

lni1 Thu, 11/13/2008 - 03:09

CW starts ok, but at the end this happens :

permit 0.0.0.253 255.255.255.0

rsooste1(config-std-nacl)#

permit 0.0.0.254 255.255.255.0

rsooste1(config-std-nacl)#

remark ### Installation PC LNI ###

remark ### Installation PC LNI ###

^

% Invalid input detected at '^' marker.

rsooste1(config)#

permit 0.0.0.229 255.255.255.0

permit 0.0.0.229 255.255.255.0

^

% Invalid input detected at '^' marker.

rsooste1(config)#

remark ### VPN Telenet - mgmt AP's ###

remark ### VPN Telenet - mgmt AP's ###

^

% Invalid input detected at '^' marker.

rsooste1(config)#

permit 172.31.16.0 0.0.0.63

permit 172.31.16.0 0.0.0.63

^

% Invalid input detected at '^' marker.

rsooste1(config)#

remark ### Management UPS (Desigo) ###

remark ### Management UPS (Desigo) ###

^

% Invalid input detected at '^' marker.

rsooste1(config)#

permit 10.24.11.211

permit 10.24.11.211

^

% Invalid input detected at '^' marker.

rsooste1(config)#

Joe Clarke Thu, 11/13/2008 - 07:54

It doesn't look like the device likes the "remark" command. What version of IOS is this device running? Please post your entire Netconfig template.

lni1 Thu, 11/13/2008 - 03:40

CW starts ok, but at the end this happens :

permit 0.0.0.253 255.255.255.0

rsooste1(config-std-nacl)#

permit 0.0.0.254 255.255.255.0

rsooste1(config-std-nacl)#

remark ### Installation PC LNI ###

remark ### Installation PC LNI ###

^

% Invalid input detected at '^' marker.

rsooste1(config)#

permit 0.0.0.229 255.255.255.0

permit 0.0.0.229 255.255.255.0

^

% Invalid input detected at '^' marker.

rsooste1(config)#

remark ### VPN Telenet - mgmt AP's ###

remark ### VPN Telenet - mgmt AP's ###

^

% Invalid input detected at '^' marker.

rsooste1(config)#

permit 172.31.16.0 0.0.0.63

permit 172.31.16.0 0.0.0.63

^

% Invalid input detected at '^' marker.

rsooste1(config)#

remark ### Management UPS (Desigo) ###

remark ### Management UPS (Desigo) ###

^

% Invalid input detected at '^' marker.

rsooste1(config)#

permit 10.24.11.211

permit 10.24.11.211

^

% Invalid input detected at '^' marker.

rsooste1(config)#

Actions

This Discussion