Configuring 3 lines in a single Ip phone

Unanswered Question
Nov 12th, 2008
User Badges:

We have Cisco 7941 Ip phone

We need to configure three Directory Numbers on a single IP phone which belongs to different partition.

Is it possible to configure in Cisco7941 model?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Kenneth Mohammed Wed, 11/12/2008 - 06:09
User Badges:
  • Silver, 250 points or more

Is this CUCM or CME. If you have CME, this can be done by creating overlay extensions on the phone. If you have CUCM I'm not sure that this would be possible.

Hope that helped. If so please rate.

Jaime Valencia Wed, 11/12/2008 - 07:23
User Badges:
  • Cisco Employee,
  • Hall of Fame,


you say partition so i assume this is CCM/CUCM

let's do the math. the phone has 2 lines, and you want to configure 3... doesn't really sound doable don't you think???

the answer is NO, you cannot configure more lines on the phone, than the phone is able to use.

the phone can be configured for up to 2 lines, if you need 3 lines get a 796X phone



if this helps, please rate


This Discussion