Giuseppe Larosa Wed, 11/12/2008 - 06:31
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Gabriel,


cisco WS-C4506 (MPC8540) processor (revision 4) with 524288K bytes of memory.

Processor board ID FOX11220EVA

MPC8540 CPU at 667Mhz, Supervisor II-PLUS-10GE


SW-RM-SXR000-F-C3-2#sh module

Chassis Type : WS-C4506


Power consumed by backplane : 0 Watts


Mod Ports Card Type Model Serial No.

---+-----+--------------------------------------+------------------+-----------

1 6 Sup II+10GE 10GE (X2), 1000BaseX (SFP) WS-X4013+10GE JAE1126NBBC

2 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V JAE1130RL5L

3 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V JAE1130RL6U


the module that supports PoE has V at the end

WS-X4548-GB-RJ45V

this provides 10/100/1000 ports with PoE


Hope to help

Giuseppe




gabrielqos Wed, 11/12/2008 - 06:47
User Badges:

Giuseppe,


Thanks for your answer. the models of the series 3750 and 3650 or other don't have 512Mb Dram?


Regards,


Gabriel.

Giuseppe Larosa Wed, 11/12/2008 - 07:19
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Gabriel,

in my network this kind of switches have 128 MB of memory.


I don't know if you can install 512MB ram on a C3750 or C3560.


I see

256 MB DRAM and 64 MB FLASH

for 3750E

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps7077/product_data_sheet0900aecd805bbe67.html


and only 128MB for 3750 Metro

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps5532/product_data_sheet0900aecd806e27b9.html


Hope to help

Giuseppe



Actions

This Discussion