CP-7910 Phones Logging Input Errors on my 3524PWR

Answered Question
Nov 12th, 2008

I have been seeing many input errors on the fastethernet interfaces of my WS-C3524PWR-XL-EN switches that have a CP-7910 IP phone connected to them. The 3524PWR switches are running the following IOS revision: c3500XL-c3h2s-mz.120-5.WC17.bin

This problem is only occurring with the 7910 series phones. The 7940 & 7960 IP phones on theses switches are not logging any input errors.

Has anybody seen this occur in their network? Is there a solution for the problem?

I have this problem too.
0 votes
Correct Answer by rob.huffman about 8 years 2 weeks ago

Hi Ryan,

I'm pretty sure we used to get alot of errors with the 7910 as well. If I remember correctly we had to hard code the port for 10/half.

Hope this helps!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
rob.huffman Wed, 11/12/2008 - 08:40

Hi Ryan,

I'm pretty sure we used to get alot of errors with the 7910 as well. If I remember correctly we had to hard code the port for 10/half.

Hope this helps!

Rob

michael.windon Wed, 05/06/2009 - 12:14

this question is not related to your issue, but i was intrested in what ccm ver you are running with your 7910s?

Actions

This Discussion