11-12-2008 01:33 PM - edited 07-03-2021 04:46 PM
When I enable WLAN override for a specific AP, and I select only 2 of the 5 avaliable WLANs, all SSIDS disapper for that AP. My WISM is running code 4.1.171.0. Does anybody know if this is an issue. The AP is an AP1131.
Thanks for your help.
11-12-2008 02:10 PM
I've never heard of that as an issue, but while you're waiting for a response I would open a TAC case and see what they have to say.
11-13-2008 03:30 AM
Hi Patrick,
what do you mean by "all SSIDS disapper for that AP".
If they are not shown in your browser as selected it's maybe a problem with that browser.
Sebastian
11-13-2008 05:25 AM
Sebastian,
Basically whenever I enable any WLAN override for an AP, none of the selected SSIDs are available. Actually no connections can be made. Granted, this is in H-REAP mode but I didn't think it made a difference.
11-13-2008 06:42 AM
Actually, I'm pretty sure that HREAP APs don't support WLAN Override :/
EDIT: Okay, I'm wrong. I found a doc that seems to support that it works.
http://www.cisco.com/en/US/docs/wireless/controller/5.1/configuration/guide/c51hreap.html
So your clients see no SSIDs being broadcast at all?
11-13-2008 08:44 AM
Correct, as soon as Override is enabled on the AP, all SSIDS are gone.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide