MPLS L2 link on FR encapsulation with DS3 interface

Unanswered Question
Nov 12th, 2008

Dear all,

After changing encapsulation to FR on DS3 interface . the sub-interface is not taking xconnect command.

Please help in this matter

NDL-MPL-PE-RTR-00#

interface Serial9/7

description ##

no ip address

mls qos trust dscp

dsu bandwidth 44210

framing c-bit

cablelength 10

no cdp enable

encapsulation frame-relay IETF

frame-relay lmi-type ansi

frame-relay intf-type dce

interface Serial9/7.101 point-to-point

description ##

no ip address

mls qos trust dscp

cablelength 10

no cdp enable

frame-relay interface-dlci 101

xconnect 202.123.47.X 101 encapsulation mpls

Thanks & Regards

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion