Dear all,
After changing encapsulation to FR on DS3 interface . the sub-interface is not taking xconnect command.
Please help in this matter
NDL-MPL-PE-RTR-00#
interface Serial9/7
description ##
no ip address
mls qos trust dscp
dsu bandwidth 44210
framing c-bit
cablelength 10
no cdp enable
encapsulation frame-relay IETF
frame-relay lmi-type ansi
frame-relay intf-type dce
interface Serial9/7.101 point-to-point
description ##
no ip address
mls qos trust dscp
cablelength 10
no cdp enable
frame-relay interface-dlci 101
xconnect 202.123.47.X 101 encapsulation mpls
Thanks & Regards