Solved: supervisor engine redundandy Cat 6509 (active module)

arturo.reyna · ‎11-12-2008

Hi everybody:

I have two catalyst 6509 with supervisor engine redundandy; first one has the module 5 active and the second has the module 6 active.

Is there a way to change configuration to set wich module will be active? I want to configure the same module active in both boxes.

Thank you for your comments.

Edison Ortiz · ‎11-12-2008

Whichever Supervisor boots up first will be the active one. There isn't a command to specify a priority for this.

With that say, you can manually force a switchover if you want the current standby Supervisor as active.

HTH,

__

Edison.

Edison Ortiz · ‎11-12-2008

Whichever Supervisor boots up first will be the active one. There isn't a command to specify a priority for this.

With that say, you can manually force a switchover if you want the current standby Supervisor as active.

HTH,

__

Edison.