cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1573
Views
0
Helpful
6
Replies

ASDM - How to run multi versions

sjoyce
Level 1
Level 1

We have serveral ASAs installed and adding more. Of course the new boxes have a new version of ASDM. How can I access both the older and newer versions of ASDM?

Thanks Mucho!!!!

1 Accepted Solution

Accepted Solutions

Here's an example-

Cisco ASDM 6.1(5) is a web-based application to configure and monitor the ASA/PIX security appliance running version 8.0 or 8.1. ASDM 6.1(5)51 is an engineering build based on the ASDM 6.1(5) release.

View solution in original post

6 Replies 6

Collin Clark
VIP Alumni
VIP Alumni

You would have to change the config to point to the one you want.

asdm image disk0:/asdm-613.bin

or

asdm image disk0:/asdm-603.bin

Why not upgrade all the boxes to the latest or a version you're comfortable with?

Collin, thanks for your reply! Is the ASDM Image dependent on the version of code that the ASA is running?

Yes, you will have to read the release notes. It will tell you which versions are supported.

Here's an example-

Cisco ASDM 6.1(5) is a web-based application to configure and monitor the ASA/PIX security appliance running version 8.0 or 8.1. ASDM 6.1(5)51 is an engineering build based on the ASDM 6.1(5) release.

Collin, thanks for your help with this issue!!!

No problem.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: