sessions timeout even the "exec-timeout 0 0" was set

Unanswered Question
Nov 13th, 2008

Please see the capture below:

HTKINGS2#sh ver

Cisco IOS Software, C3750 Software (C3750-IPBASE-M), Version 12.2(35)SE5, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Thu 19-Jul-07 19:15 by nachen

Image text-base: 0x00003000, data-base: 0x01080000

ROM: Bootstrap program is C3750 boot loader

BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.2(25r)SEC, RELEASE SOFTWARE (fc4)

HTKINGS2 uptime is 8 weeks, 3 days, 2 hours, 2 minutes

System returned to ROM by power-on

System restarted at 11:57:59 aest Tue Sep 16 2008

System image file is "flash:c3750-ipbase-mz.122-35.SE5/c3750-ipbase-mz.122-35.SE5.bin"

cisco WS-C3750-48P (PowerPC405) processor (revision L0) with 118784K/12280K bytes of memory.

Processor board ID FDO1234Y5NK

Last reset from power-on

1 Virtual Ethernet interface

96 FastEthernet interfaces

8 Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.

==============================================

HTKINGS2# sh run | be vty

line vty 0 4

exec-timeout 0 0

transport output telnet

==============================================

HTKINGS2#sh user

Line User Host(s) Idle Location

* 1 vty 0 cheungk idle 00:00:00 iyengar.hdoc.nswhealth.net

====================

I telneted into the switch for management purpose, the session was timed out if the acitivity. Please help why it is not working?????

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
cheung.kelvin Thu, 11/13/2008 - 20:10

Sorry the last statement shall be:

I telneted into the switch for management purpose, the session was timed out if there was no acitivity. Please help why it is not working?????

Actions

This Discussion