cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
812
Views
0
Helpful
8
Replies

Cisco 2811 not going ahead from Switch:

ashish.sehgal
Level 1
Level 1

Router Details :

model number Cisco 2811

With switch model detail- NME-16ES-1G-P

PROBLEM FACING:

once if you switch from router to switch its showing as

Switch :

1 Accepted Solution

Accepted Solutions

To download an image you need a valid Cisco contract which i think you have.

The EtherSwitch service modules support the same Cisco IOS Software images as the Catalyst 3750 and Catalyst 3750-E Series Switches

YOu can download the image to the router flash and then do an xmodem to transfer it to the ether switch module.

Have a look at the software section in the below link

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/prod_qas0900aecd8028d16a_ps5855_Products_Q_and_A_Item.html

HTH

Narayan

View solution in original post

8 Replies 8

royalblues
Level 10
Level 10

It seems that the etherswitch module image is corrupted.

Have a look at this link to recover a corruspted image

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t14/feature/guide/miragenm.html#wp1768057

HTH

Narayan

Want to ask you following question:

Is the ether switch module image/IOS loaded in the same flash where router image/IOS is loaded.

How can I download the image from the cisco link?

Could you provide me the ether switch image name specific to 2811 router.

I have already tried downloading the correct image from the Cisco site using software advisor, but couldn't find the correct image.

Pls Help

Rgds,

Ashish

To download an image you need a valid Cisco contract which i think you have.

The EtherSwitch service modules support the same Cisco IOS Software images as the Catalyst 3750 and Catalyst 3750-E Series Switches

YOu can download the image to the router flash and then do an xmodem to transfer it to the ether switch module.

Have a look at the software section in the below link

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/prod_qas0900aecd8028d16a_ps5855_Products_Q_and_A_Item.html

HTH

Narayan

Can I download any of Cat3750 or Cat3750-E series IOS and upload the same in the router flash ?

Rgds,

Ashish

yes (above 12.2(25)EZ) as long as you have a valid Cisco contract..

Narayan

I ve downloaded c3750-ipservicesk9-mz.122-46.SE

do you think it will work.

Rgds,

Ashish

yes.

follow the recovery procedure link posted earlier

Narayan

ashish.sehgal
Level 1
Level 1

Thanks Narayan,

The issue got resolved.Thanks a tonne once again for all your support and valuable help.

Regards,

Ashish

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: