Solved: Cisco 2811 not going ahead from Switch:

ashish.sehgal · ‎11-14-2008

Router Details :

model number Cisco 2811

With switch model detail- NME-16ES-1G-P

PROBLEM FACING:

once if you switch from router to switch its showing as

Switch :

royalblues · ‎11-17-2008

To download an image you need a valid Cisco contract which i think you have.

The EtherSwitch service modules support the same Cisco IOS Software images as the Catalyst 3750 and Catalyst 3750-E Series Switches

YOu can download the image to the router flash and then do an xmodem to transfer it to the ether switch module.

Have a look at the software section in the below link

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/prod_qas0900aecd8028d16a_ps5855_Products_Q_and_A_Item.html

HTH

Narayan

View solution in original post

royalblues · ‎11-16-2008

It seems that the etherswitch module image is corrupted.

Have a look at this link to recover a corruspted image

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t14/feature/guide/miragenm.html#wp1768057

HTH

Narayan

ashish.sehgal · ‎11-17-2008

Want to ask you following question:

Is the ether switch module image/IOS loaded in the same flash where router image/IOS is loaded.

How can I download the image from the cisco link?

Could you provide me the ether switch image name specific to 2811 router.

I have already tried downloading the correct image from the Cisco site using software advisor, but couldn't find the correct image.

Pls Help

Rgds,

Ashish

royalblues · ‎11-17-2008

To download an image you need a valid Cisco contract which i think you have.

The EtherSwitch service modules support the same Cisco IOS Software images as the Catalyst 3750 and Catalyst 3750-E Series Switches

YOu can download the image to the router flash and then do an xmodem to transfer it to the ether switch module.

Have a look at the software section in the below link

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/prod_qas0900aecd8028d16a_ps5855_Products_Q_and_A_Item.html

HTH

Narayan

ashish.sehgal · ‎11-17-2008

Can I download any of Cat3750 or Cat3750-E series IOS and upload the same in the router flash ?

Rgds,

Ashish

royalblues · ‎11-17-2008

yes (above 12.2(25)EZ) as long as you have a valid Cisco contract..

Narayan

ashish.sehgal · ‎11-17-2008

I ve downloaded c3750-ipservicesk9-mz.122-46.SE

do you think it will work.

Rgds,

Ashish

royalblues · ‎11-17-2008

yes.

follow the recovery procedure link posted earlier

Narayan

ashish.sehgal · ‎11-23-2008

Thanks Narayan,

The issue got resolved.Thanks a tonne once again for all your support and valuable help.

Regards,

Ashish